Mycomarkup

Mycomarkup is Mycorrhiza Wiki's own markup language.

It is the only supported markup, there is no support for Markdown, Creole, etc.

A Mycomarkup document (which is most often a hypha's text part) consists of blocks. There are different blocks for different purposes.

Table of contents

Paragraph

Paragraphs are the most ubiquitous blocks. You will use them a lot.

To create a paragraph, just write text. Paragraphs are separated by empty lines.

  • Paragraph 1

Paragraph 2
Second line of paragraph 2

  • Paragraph 1

    Paragraph 2
    Second line of paragraph 2

You can apply styling to paragraph content.

  • You can use //italic//, **bold**, `monospace`, ++highlighted++, ^^lifted^^, __underscored__, ,,lowered,, or ~~striked-through~~ text. You can also ++**//combine//**++ them!

  • You can use italic, bold, monospace, highlighted, lifted, underscored, lowered or striked-through text. You can also combine them!

Use the backslash to prevent the styling.

  • This is not \//italic\//

  • This is not //italic//

You do not have to close the stylings, they will span until the end of line.

  • This is //italic
This is not

  • This is italic
    This is not

You can include inline links.

  • Just a paragraph with a couple of [[https://example.org | links]] leading [[nowhere]].

  • Just a paragraph with a couple of links leading nowhere.

Inline links are part of a paragraph.

External links can be placed verbatim if they have protocol specified. These links are called autolinks. It may not work as expected sometimes. Supported protocols for autolinks are https, http, gemini, gopher, ftp.

Wrap links to hyphae and external links with [[ and ]].

  • Links to a [[hypha]] and [[https://example.org]].

  • Links to a hypha and example.org.

If you want to change the displayed text of the link, write it after |.

  • Links to [[hypha | a Hypha]] and [[https://example.org | some website]].

  • Links to a Hypha and some website.

Since hypha names are case-insensitive, these links are basically the same: hypha, Hypha, HYPHA.

Rocket links are special links. They take up a whole line. They are not consistent with usual inline links. They were taken from gemtext.

The display text is written after the first space, not |. If you want to link a hypha with spaces in it, replace the spaces with _.

You don't have to write the full hypha name in every link, you can use relative links.

Consider you are editing a hypha called fruit/apple.

To link fruit/pear (a sibling hypha) you can write [[../pear]]. To link fruit/apple/red (a subhypha) you can write [[./red]]. You can do the same in rocket links, image galleries, transclusion and everywhere else you write hypha names.

There is also a way to link the wiki's non-hypha pages. For example, to link the Recent changes page, you can write [[/recent-changes]]. You should use that rather than write the site's full URL because it may change in the future.

Links come in several colors. Blue links are links to existing resources, while red links are links to non-existent resources. All external links are considered existing, therefore they are blue. Internal hypha links are always checked for existence.

Note that visited blue links are colored purple but are still called blue links. Moreover, blue links are yellow in the default dark theme.

Heading

There are six levels of headings. They consist of some hash signs followed by a space and the heading itself. You can format the heading like a paragraph. You should probably not use level 1 because the hypha name title is already level 1.

# level 1
## level 2
### level 3
#### level 4
##### level 5
###### level 6

There is an invisible link denoted by the ยง sign near every heading (right after the heading text). You can reveal it with a mouse. If you click it, the URL in the browser will change to the URL leading to that very heading. Try that on headings in this article.

Codeblock

Use codeblocks to show code or any other preformatted text. Codeblocks start with triple backticks on column 1 and end similarly. You can write any text after the backticks, it is ignored. Put the preformatted text between them.

Like that, but without leading spaces:

 ```
 this is preformatted
    see
 ```
this is preformatted
   see

Horizontal line

Write four hyphens to insert a horizontal line.

  • ----

Use image galleries to embed images to the page. Images can be either hyphae or external files. In the example below you can replace the URL with a hypha's name. If that hypha is an image, the image will be shown.

You can write a description for the image and specify its size.

  • img {
https://upload.wikimedia.org/wikipedia/commons/4/48/Timbre_ciuperci_otravitoare.jpg
https://upload.wikimedia.org/wikipedia/commons/4/48/Timbre_ciuperci_otravitoare.jpg {
	Description //here//
}
https://upload.wikimedia.org/wikipedia/commons/4/48/Timbre_ciuperci_otravitoare.jpg | 100 { Size }
https://upload.wikimedia.org/wikipedia/commons/4/48/Timbre_ciuperci_otravitoare.jpg | 50*50
}
  • Description here
    Size
    Square

If you were embedding a hypha called an image hypha, it would look like this:

  • img {
an image hypha
}

If you put just one image, it will be displayed with no decorations:

  • img { https://mycorrhiza.wiki/static/favicon.ico }

List

Lists are used for sequential or tree data. They are quite popular.

Mark each list entry with an asterisk and a space:

  • * one
* two
* three

    • one

    • two

    • three

If you place dots after the asterisks, the list becomes numbered:

  • *. one
*. two
*. three

    1. one

    2. two

    3. three

If you place x or v, you make the entries unfinished and finished TODO entries respectively.

  • *v Done
*x Not done
**v Super done
** Cool

    • Done

    • Not done

      • Super done

      • Cool

All of Mycomarkup is supported in list entries. If you want to have multi-line entries, wrap the contents in curly braces.

  • * {
## Heading
Text
}
* Not multiline

    • Heading

      Text

    • Not multiline

Quote

Prepend lines with > to quote them.

  • > ## A heading
>
> A paragraph
> > A nested quote

  • A heading

    A paragraph

    A nested quote

Table

Tables are delimited by table {...}. Both delimeters have to be on their own lines. You can write table's caption on the first line.

Empty table:
table {
}

Empty table:

table { Empty table but with proper caption
}
Empty table but with proper caption

Heading cells start with !, normal cells start with |. Table rows are separated with line breaks:

table {
! Monday  ! Friday
| sad day | happy day
}

Monday

Friday

sad day

happy day

Table cells support all paragraph styling:

table {
! Monday ! Friday
| sad day | //happy day//
}

Monday

Friday

sad day

happy day

If you a cell to span several columns, write cell starting character that many times without spaces:

table {
! Monday ! Friday
|| ok day
}

Monday

Friday

ok day

Currently cells spanning several rows are not supported.

If want to write a multiline cell, wrap its contents in {} and continue the table:

table {
| a | b
| { there are
//two// paragraphs in this cell! } | d
}

a

b

there are
two paragraphs in this cell!

d

You can omit the initial pipe characters. They will be inserted automatically:

table {
a | b
c | d
}

a

b

c

d

Transclusion

Transclusion is the mechanism of including contents of other hyphae into one hypha.

To include a hypha named yoghurt, write a line like that:

<= yoghurt

In the 1.2 Release, the transclusion semantics and syntax were changed. If you were using transclusion before that release, please update your hyphae. For time being, the engine will report transclusion using the old syntax with colon.

Transclusion lines start with a reverse-rocket symbol (<=) followed by zero or more spaces. The text on the line before a line break or a pipe character (|) is called target or target hypha. If there is a pipe, the text after it is called selector. If there is no pipe, the selector is empty. Both target and selector are stripped of left-side and right-side whitespace before further processing.

<= target hypha
<= target hypha |
<= target hypha | selector

Selector

The selector specifies what part of the target to transclude. The parser checks for these words:

  • full. Transclude the whole document.

  • text. Transclude all text.

  • attachment. Transclude attachment only.

  • description. Transclude first paragraph only.

  • overview. Short for both attachment and description.

If only one of them is found, the corresponding part is transcluded. If several are found, the bigger transclusion is done. If none are found, overview is implicitly considered.

Additionally, if the word blend is present, the transclusion is rendered without the gray box and the link to the target by default.

This is an actual transclusion of a hypha below. It will fail if your wiki does not have this hypha.

u

This is the parent hyphae of all users. Below you can find all accounts that contribute to this wiki.

Recursive transclusion is also supported but it is limited to three iterations.

See also